Preface
SIMATIC IPC477D, IPC477D PRO
4 Operating Instructions, 11/2016, A5E31347228-AF
In these operating instructions, "device" is used as the standard term for
"SIMATIC IPC477D" (built-in unit) or "SIMATIC IPC477D PRO" (PRO device). "CP" is used
as an abbreviation for "CP 1616 onboard" (for PROFINET) or "CP 5622" (for PROFIBUS).
In these operating instructions, the terms "Windows Embedded Standard 7 P" and
"Windows Embedded Standard 7 E" are also abbreviated with the term "Windows
Embedded Standard". "Windows 7" is used as an abbreviation for "Windows 7 Ultimate".
A touch device generally refers to a device with a capacitive multi-touch screen or a resistive
single touch screen. Touch screen is the general term for a resistive single touch screen or a
capacitive multi-touch screen.
Note
A note is important information about the product, handling the product or a
reference to
specific sections of the documentation that require special consideration.
The following editions of these operating instructions have already been published:
Amendments and corrections
Description of devices with capacitive multi-touch screen
Update with IPC Wizard 2.1 and corrections
07/2015 Description of the 19" PRO devices: fully enclosed, mounting prepared for support arm
without extension elements (flange on top)/prepared for stand/extension elements
08/2016
• Description of the 15"
1.)
and 22" PRO devices: fully enclosed, mounting prepared
for support arm without extension elements (flange on top)/prepared for
stand/extension elements (flange on bottom)/prepared for support arm and exten-
sion elements
• Description of the built-in units with ATEX/IECEx/UL Hazloc approval.
• Description of the built-in units with marine approval.
Amendment to the Extension Unit
1.) Available as of 11/2016
To Next Page
Loading...
Need help?
General
