Mounting and connecting the device
3.3 Mounting the PRO device
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF
77
1. If an adapter plate for the Siemens flange mount is included with your support arm, attach
the adapter plate to the support arm with 4 M6x12 screws. Pay attention to the torque
that is specified for the support arm.
2. Insert all connection cables through the opening of the flange mount into the terminal
compartment of the PRO device. Make sure that the connection cables are not damaged.
To Next Page
Loading...
Need help?
General
