Mounting
5.2 EMC-compliant setup
SIWAREX WP321
20 Manual, 07/2014, A5E33715669A-02
EMC-compliant setup
5.2.1
The electronic weighing system described here was developed for use in industrial
environments and complies with high EMC requirements. It ensures safe operation even in
harsh environmental conditions. Nevertheless, you should still carry out EMC planning
before installing your devices in order to determine any sources of interference and include
them in your considerations.
EMC (electromagnetic compatibility) describes the capability of electrical equipment to
operate without errors in a given electromagnetic environment, without being subject to
external influence and without influencing external devices in any way.
Possible effects of interference
Electromagnetic interferences can influence the electronic weighing system described here
in various ways:
● Electromagnetic fields having a direct influence on the system
● Interferences transported by communication cables
● Interferences having an effect via process cables
● Interferences entering the system via the power supply and/or protective ground
Interferences can impair the fault-free functioning of the electronic weighing system.
Depending on the propagation medium (conducted or non-conducted) and the distance
between the interference source and the device, interferences can enter the faulty device
through four different coupling mechanisms:
● Electrical coupling
● Capacitive coupling
● Inductive coupling
● Radiation coupling
To Next Page
Loading...
Need help?
General
