9-1
DSR-2000A/2000AP
9-1. Adjustment/Check Items When Replacing Board
No adjustment is required for the board other than below.
Board name Setting/Adj. after replacement Contents
(Reference Section)
APR-45 board 10-2. Audio Adjustment 10-2-1. Audio OUTPUT Level Adjustment
10-2-2. Audio EE Level Adjustment
10-4. SDI/SDTI 10-4-1. Free Run Adjustment
MS-64 board 5. Maintenance Menu 5-3-3. Servo Adjust
S/T-REEL & CAPSTAN Adjustment
TENTION Adjustment
6-2. Hours Meter Initialize the Resetable Hours Meter
Operating Instructions Resetting of Setup Menu Data
Chapter 6. Setup Menu
SV-212 board 5. Maintenance Menu 5-3-3. Servo Adjust
S/T-REEL & CAPSTAN Adjustment
TENTION Adjustment
SY-278 board 5. Maintenance Menu 5-3-1. Menu Data Control
MENU/SW DATA SAVE/LOAD
RP-111 board 5. Maintenance Menu 5-3-5. Electrical Adjust
PLL F0 Adjustment
EQ (DVCAM) Adjustment
EQ (DV) Adjustment
VPR-62A board 10-3. Video Adjustment 10-3-1. to 10-3-19.
Section 9
Adjustment When Replacing Board
To Next Page
Loading...
Need help?
General
