Suzuki GRAND VITARA XL-7 User Manual

5A-6 BRAKES PIPE/HOSE/MASTER CYLINDER
Master Cylinder Reservoir
REMOVAL
1) Disconnect reservoir lead wire at coupler.
2) Clean outside of reservoir (1).
3) Take out fluid with syringe or such.
4) Remove reservoir stopper (3).
5) Remove reservoir (1).
INSTALLATION
1) When using new grommets, lubricate them with the same
fluid as the one to fill reservoir (1) with. Then press-fit grom-
mets to master cylinder (2). Grommets must be seated in
place.
2) Install reservoir (1) and then insert stopper (3).
3) Connect reservoir lead wire.
4) Fill reservoir (1) with specified fluid.
5) Upon completion of installation, check for fluid leakage.
2. Master cylinder
1
3
2
NOTE:
Do not allow brake fluid to get on painted surfaces.
2. Stopper
3. Grommets
3
3
1
2
NOTE:
See NOTE at the beginning of this section.
1
3
2

Suzuki GRAND VITARA XL-7 Specifications

General

Brand	Suzuki
Model	GRAND VITARA XL-7
Category	Automobile
Language	English