Suzuki GRAND VITARA XL-7 User Manual

7F-10 DIFFERENTIAL (REAR)
Differential carrier
For press-fitting drive bevel pinion bearing outer races, use spe-
cial tools as shown in the figure.
Special tool
(A) : 09924-74510
(B) : 09926-68310
(C) : 09913-75510
Differential case
1) After applying differential oil to differential gear (4), pinions
(5), pinion shafts (6), thrust washer (2) and spring washer
(1), install them in differential right case (3).
For correct installing direction of thrust washer (2) and spring
washer (1), refer to the figure.
2) When installing pinion shaft No.2 (2) (shorter) into differential
case and pinion, insert its “a” side into pinion joint (1).
3) Check differential pinion gear (1) for smooth rotation.
1. Differential carrier
NOTE:
“a” is longer than “b”. (“a” > “b”)
1
2
a
b
1

Suzuki GRAND VITARA XL-7 Specifications

General

Brand	Suzuki
Model	GRAND VITARA XL-7
Category	Automobile
Language	English