Suzuki GRAND VITARA XL-7 User Manual

8E-8 CRUISE CONTROL SYSTEM
Cruise Main Switch Indicator Lamp Circuit Check
Fig. for Step 2
Step Action Yes No
1 Check Circuit for Short.
3) Disconnect connector from cruise control module with
ignition switch OFF.
4) Turn ignition switch ON.
Does cruise main switch indicator lamp turn ON?
“LT GRN/WHT” cir-
cuit is shorted to
ground.
Go to Step 2.
2 Check Circuit for Open
1) Check for proper connection to cruise control module at
terminal E132-10.
2) If OK, connect terminal E132-10 to ground.
Does indicator lamp turn ON at ignition switch ON?
Lamp circuit is OK. Go to Step 3.
3 Lamp Bulb Check
1) Remove cruise main switch from instrument panel.
2) Remove lamp bulb and check it.
Is bulb in good condition?
“BLK/WHT” or “LT
GRN/WHT” circuit
is open.
Replace bulb.

Suzuki GRAND VITARA XL-7 Specifications

General

Brand	Suzuki
Model	GRAND VITARA XL-7
Category	Automobile
Language	English