CRUISE CONTROL SYSTEM 8E-11
VSS Circuit Check
Fig. for Step 1
Step Action Yes No
1 Vehicle Speed Sensor Circuit Check
1) Disconnect connector from cruise control module with
ignition switch OFF.
2) Check for proper connection to cruise control module at
terminal E132-1.
3) If OK, check for continuity between terminals E132-1 and
E59-2, terminals C52-2 and C20-1 referring to “CRUISE
CONTROL SYSTEM” in Section 8A.
Is check result satisfactory?
VSS circuit is OK. “BLU/YEL” cir-
cuit is open.