6C-29 Power Assisted Steering System:
DTC “C1113”: Torque Sensor (Main / Sub) Circuit Correlation Malfunction (LT-A750XP/ZK9)
B931G36304009
Troubleshooting
CAUTION
!
Never remove the torque sensor to prevent accident and damage.
NOTE
• After repairing the trouble, clear the DTC using a SDS tool or mode coupler switch. Refer to “DTC
(Diagnostic Trouble Code) Deleting (LT-A750XP/ZK9) (Page 6C-21)”.
• DTC “C1113” and “C1115” are indicated at the same time due to the malfunction of the same torque
sensor circuit.
Possible Cause
• Faulty torque sensor signal circuit.
• Faulty torque sensor.
• Faulty EPS control unit.
To Next Page
Loading...
Need help?
General
