Syntax and Commands
AFG3000 Series Arbitrary/Function Generators Reference Manual 3-57
[SOURce[1|2]]:FSKey:SOURce
This command sets or queries the source of modulation signal of FSK modulation
for the specified channel.
Group
Source
Syntax
[SOURce[1|2]]:FSKey:SOURce [INTernal|EXTernal]
[SOURce[1|2]]:FSKey:SOURce?
Arguments
INTernal means that the carrier waveform is modulated with an internal source.
EXTernal means that the carrier waveform is modulated with an external source.
Returns
INT|EXT
Examples
SOURce1:FSKey:SOURce INTernal
sets the CH 1 source of modulating signal to internal.
[SOURce[1|2]]:FSKey:STATe
This command enables or disables FSK modulation. The query command returns
the state of FSK modulation.You can select a sine, square, ramp, or arbitrary wave-
form for the carrier waveform.
Group
Source
Syntax
[SOURce[1|2]]:FSKey:STATe {ON|OFF|<NR1>}
[SOURce[1|2]]:FSKey:STATe?
Arguments
ON or <NR1>≠0 enables FSK modulation.
OFF or <NR1>=0 disables FSK modulation.
Returns
<NR1>
Examples
SOURce1:FSKey:STATe ON
enables the CH 1 FSK modulation.
To Next Page
Loading...
Need help?
General
