Tektronix AFG3000 Series Reference Manual

Syntax and Commands
3-102 AFG3000 Series Arbitrary/Function Generators Reference Manual
TRACe|DATA:DEFine (No Query Form)
This command resets the contents of edit memory.
Group
Trace
Syntax
TRACe|DATA:DEFine EMEMory[,{<points>|<trace_name>}]
Arguments
<points>::=<NR1>
where <NR1> is the number of points for the waveform data in the edit memory
that ranges from 2 to 65536 for AFG3021 and AFG3022, and 2 to 131072 for
AFG3101, AFG3102, AFG3251, and AFG3252.
If the second parameter in the argument is a numerical value, the length of the edit
memory will be the number of points specified by this number and each point will
be initialized to the default value (8191).
<trace_name>::={SINusoid|SQUare|PULSe|RAMP|NOISe}
If the second parameter in the argument is specified by <trace_name>, the speci-
fied waveform data will be copied to the edit memory. The number of points for the
specified waveform data is equal to the number of points for one period of current
waveform data in the edit memory.
If the <points> and <trace_name> parameters in the argument are omitted, the edit
memory will be initialized to the default number of points (1000) and value (8191).
Examples
DATA:DEFine EMEMory,1000
sets the length of the edit memory to 1000 points and resets the data points to the
default value.

Tektronix AFG3000 Series Specifications

General

Brand	Tektronix
Model	AFG3000 Series
Category	Portable Generator
Language	English