Tektronix CSA7404B User Manual

Displaying Waveforms
3- 126
CSA7000B Series & TDS7000B Series Instruments User Manual
Use MultiView Zoom (push the MultiView Zoom button) when you want to
expand a waveform to inspect small feature(s) on that waveform or compare the
feature to the non-zoomed waveform(s). For example, to temporarily expand the
front corner of a pulse to inspect its aberrations, use MultiView Zoom to expand
it horizontally and vertically.
To help you use MultiView Zoom effectively, consider how it operates on
waveforms. When in zoom mode, the instrument vertically expands or contracts
one waveform at a time unless zoom lock is on. Also, the instrument only
vertically positions one waveform at a time when in MultiView Zoom.
When zooming horizontally, MultiView Zoom expands all waveforms at the
same time.
When zooming horizontally or vertically, MultiView Zoom expands or contracts
the waveform by the zoom scale factor.
Use the procedure that follows to zoom a waveform. For more information,
display online help when performing the procedure.
Overview To zoom waveforms Control elements and resources
Prerequisites
1. The instrument must be installed and operating.
Instrument must be powered up, with horizontal and
vertical controls and triggering set up.
See page 3--63 for trigger setup.
Using with Waveforms
To Zoom Waveforms

Tektronix CSA7404B Specifications

General

Brand	Tektronix
Model	CSA7404B
Category	Measuring Instruments
Language	English