Appendix A: Specifications
CSA7000B Series & TDS7000B Series Instruments User Manual
A-3
Optical-to-Electrical Converter. C SA7000B S eries only. Test optical signals using
the integrated optical-to-electrical converter and a fully calibrated signal path.
Recovered clock and data signals are available. Optical reference receivers are
available for selected optical communications standards.
Average, Envelope, and Hi Res Acquisition. Use Average acquisition mode to
remove uncorrelated noise from your signal. Use Envelope to capture and
display the maximum variation of the signal. Use Hi Res to increase vertical
resolution for lower bandwidth signals.
Waveform Math. Set up simple math waveforms using the basic arithmetic
functions or create more advanced math waveforms using the math expression
editor. Waveform expressions can even contain measurement results and other
math waveforms.
Spectral Analysis. Display spectral magnitude and phase waveforms based on
your time-domain acquisitions. Control the instrument using the traditional
spectrum analyzer controls such as span and center frequency.
Color LCD Display. Identify and differentiate waveforms easily with color coding.
Waveforms, readouts, and inputs are color matched to increase productivity and
reduce operating errors. Enhance visualization of waveforms with color grading.
Digital Phosphor. The instrument can clearly display intensity modulation in your
signals. The instrument automatically overlays subsequent acquisitions and then
decays them to simulate the writing and decay of the phosphor in an analog
instrument CRT. The feature results in an intensity-graded or color-graded
waveform display that shows the information in the intensity modulation.
Fit to Screen. The Digital Phosphor technology performs the compression
required to represent all record points on the screen, even at the maximum record
length settings.
MultiView Zoom. To take advantage of the full resolution of the instrument you
can zoom in on a waveform to see the fine details. Both vertical and horizontal
zoom functions are available. Zoomed waveforms can be aligned, locked, and
automatically scrolled.
Cursors. Use cursors to take simple voltage, time, and frequency measurements.
Signal Processing
Features
Display Features
Measurement Features
To Next Page
Loading...
Need help?
General
