Field Description
VLAN Select whether the VLAN segmentation is to be used for this
wireless network.
The function is activated by selecting ,.
The function is disabled by default.
VLAN ID Enter the number that identifies the VLAN.
Possible values are to .
VLAN ID 1 is not possible as it is already in use.
13.4 Monitoring
This menu is used to monitor your WLAN infrastructure.
13.4.1 Active Clients
Fig. 69: Wireless LAN Controller->Monitoring->Active Clients
In the Wireless LAN Controller->Monitoring->Active Clients menu, current values of all
active clients are displayed.
For each client you will see an entry with the following parameter set: Location, Name,
VSS, Client MAC, Client IP Address, Signal : Noise (dBm) , Status, Uptime.
Possible values for Status
Status Meaning
None The client is no longer in a valid status.
Logon The client is currently logging on with the WLAN.
Associated The client is logged on with the WLAN.
Authenticate The client is in the process of being authenticated.
Teldat GmbH
13 Wireless LAN Controller
bintec Rxxx2/RTxxx2 181
To Next Page
Loading...
Need help?
General
