Teldat bintec R3002 User Manual

• L2TP LNS Mode (L2TP Network Server): for incoming connections only
• L2TP LAC Mode (L2TP Access Concentrator): for outgoing connections only
Note the following when configuring the server and client: An L2TP tunnel profile must be
created on each of the two sides (LAC and LNS). The corresponding L2TP tunnel profile is
used on the initiator side (LAC) to set up the connection. The L2TP tunnel profile is needed
on the responder side (LNS) to accept the connection.
18.2.1 Tunnel Profiles
A list of all configured tunnel profiles is displayed in the VPN->L2TP->Tunnel Profiles
menu.
18.2.1.1 New
Choose the New button to create additional tunnel profiles.
Fig. 139: VPN->L2TP->Tunnel Profiles ->New
The menu VPN->L2TP->Tunnel Profiles ->New consists of the following fields:
Teldat GmbH
18 VPN
bintec Rxxx2/RTxxx2 361

Teldat bintec R3002 Specifications

General

Brand	Teldat
Model	bintec R3002
Category	Gateway
Language	English