Field Description
Here you enter the IP address of the multicast network seg-
ment.
Multicast Group Prefix
Length
Only if Multicast Group Range = *)"!" @
Here you enter the network mask length of the multicast net-
work segment.
224.0.0.0/4 indicates the entire multicast class D segment.
Possible values: (default value) to $.
Rendezvous Point IP
Address
Enter the IP address or the hostname of the rendezvous points.
Precedence
Enter the value for pimGroupMappingPrecedence to be used for
static RP configurations. This allows precise control over which
configuration is to be replaced by this static configuration.
When the function is activated pimStaticRPOverrideDynamic is
ignored. The absolute values of this object are only significant
on the local router and need not be synchronised with other
routers.
The function is deactivated with the default value . If the func-
tion is not activated by setting a value not 0, this can different
consequences for other routers. Hence, avoid using this func-
tion if exact control of the behaviour of the static RP is not re-
quired.
16.4.3 PIM Options
Fig. 115: Multicast->PIM->PIM Options
Teldat GmbH
16 Multicast
bintec Rxxx2/RTxxx2 267
To Next Page
Loading...
Need help?
General
