Field Value
on any of the Ethernet interfaces, is used as the wildcard
MAC address. This wildcard MAC address can only be reset
by rebooting the device or by selecting another wildcard
mode.
• ,#: If you choose this setting, the internal WLAN MAC ad-
dress is used to establish a connection to the access point. As
soon as a non-IP unicast frame or non-ARP unicast frame ap-
pears, it is forwarded to the MAC address from which the last
non-IP unicast frame or non-ARP unicast frame was received
on the Ethernet interface of the device. This wildcard MAC ad-
dress is renewed with each non-IP unicast frame or non-ARP
unicast frame.
Wildcard MAC Address Only for Wildcard Mode = #"
Enter the MAC address of a device that is connected over IP.
Transparent MAC Ad-
dress
Only for Wildcard Mode = #", !#
Choose whether or not the Wildcard MAC Address are used in
addition as WLAN MAC address to establish the connection to
the access point.
The function is enabled with ,.
The function is disabled by default.
10.4 Administrative Access
In this menu, you can configure the administrative access to the device.
10.4.1 Access
In the System Management->Administrative Access->Access menu, a list of all IP-
capable interfaces is displayed.
Teldat GmbH
10 System Management
bintec Rxxx2/RTxxx2 89
To Next Page
Loading...
Need help?
General
