Teldat bintec R3002 User Manual

Field Description
The function is disabled by default.
Maximum Upload
Speed
Only for Traffic Shaping = enabled.
Enter a maximum data rate for the queue in kbits.
Possible values are  to .
The default value is .
Overbooking allowed Only for Traffic Shaping = enabled.
Enable or disable the function. The function controls the band-
width limit.
If Overbooking allowed is activated, the bandwidth limit set for
this queue can be exceeded, as long as free bandwidth exists
on the interface.
If Overbooking allowed is deactivated, the queue can never
occupy bandwidth beyond the bandwidth limit that has been set.
The function is enabled with ,.
The function is disabled by default.
Burst size Only for Traffic Shaping = enabled.
Enter the maximum number of bytes that may still be transmit-
ted temporarily when the data rate permitted for this queue has
been reached.
Possible values are  to .
The default value is .
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu.
Field Description
Dropping Algorithm Choose the procedure for rejecting packets in the QoS queue, if
the maximum size of the queue is exceeded.
Possible values:
Teldat GmbH
14 Networking
bintec Rxxx2/RTxxx2 225

Teldat bintec R3002 Specifications

General

Brand	Teldat
Model	bintec R3002
Category	Gateway
Language	English