Field Description
Area ID Enter the ID to identify the OSPF aea. The backbone area is
.
Import external routes
Specifies whether the gateway routing information generated
from external autonomous systems (not areas) is to be impor-
ted.
The function is enabled with ,.
The function is activated by default.
Import summary
routes
Only for Import external routes = .#,
Define whether summary LSAs (routing information generated
by Area Border Gateway) are to be sent to the stub area.
Possible values:
• , (default value): Activates import.
• .#,: Deactivates the import.
Create area default
route (only ABR)
Only for Import external routes = .#,
Select whether the Area Border Gateway shall send no LSA's in
the stub area, but rather only propagate a default route.
The function is enabled with ,.
The function is not activated by default.
Fields in the Route Aggregation menu.
Field Description
IP Address
Define the OSPF area.
•  -##: Here you enter the IP address of the area to be
combined.
• '#7: Enter the netmask here.
• -#: Subnetworks that are combined into areas either
initiate propagation of the given combination ( J#, default
value), or cause the subnetwork not to be propagated outside
the area at all ( '), i.e. neither the actual subnetworks nor
the combined overall subnetwork are propagated.
Add new entries with Add.
Teldat GmbH
15 Routing Protocols
bintec Rxxx2/RTxxx2 249
To Next Page
Loading...
Need help?
General
