Field Description
• -52?-: Primarily run CHAP, otherwise PAP.
• %*2?-: Only run MS-CHAP version 1 (PPP Microsoft
Challenge Handshake Authentication Protocol).
• -52?-5%*2?-: Primarily run CHAP, on denial then the
authentication protocol required by the connection partner.
(MSCHAP version 1 or 2 possible.)
• %*2?-: Run MS-CHAP version 2 only.
• ': Some providers use no authentication. In this case, se-
lect this option.
DNS Negotiation Select whether your device receives IP addresses for Primary
DNS Server and Secondary DNS Server from the connection
partner or sends these to the connection partner.
The function is enabled with ,.
The function is enabled by default.
Prioritize TCP ACK
Packets
Select whether the TCP download is to be optimised in the
event of intensive TCP upload. This function can be specially
applied for asymmetrical bandwidths (ADSL).
The function is enabled with ,.
The function is disabled by default.
LCP Alive Check Select whether the availability of the remote terminal is to be
checked by sending LCP echo requests or replies. This makes
it possible to switch to a backup connection more quickly in the
event of line faults.
The function is enabled with ,.
The function is enabled by default.
MTU Enter the maximum packet size (Maximum Transfer Unit, MTU)
in bytes that is allowed for the connection.
With default value -3", the value is specified by link
control at connection setup.
If you disable -3", you can enter a value.
Possible values are to .
17 WAN Teldat GmbH
276 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
