Teldat bintec R3002 User Manual

20.1.1.1 Edit or New
Choose the icon to edit existing entries. Choose the New button to create application
level gateway entries.
Fig. 155: VoIP->Application Level Gateway->SIP Proxies-> +New
The VoIP->Application Level Gateway->SIP Proxies-> +New menu consists of the fol-
lowing fields:
Fields in the Basic Parameters menu.
Field Description
Description Enter the name of the application level gateway.
Administrative Status Select whether the SIP proxy should be enabled or disabled.
The function is activated by selecting ,.
The function is enabled by default.
Protocol Select the protocol to be used.
Possible values: 0. (default value) or (2
Enter the port to be supervised by the proxy as Destination
Port.
or each destination port to which VoIP clients from the LAN can
connect, you must configure a proxy.
The ports can be provider-specific.
Session Timeout Enter the time in seconds for which a session stays up if no
Teldat GmbH
20 VoIP
bintec Rxxx2/RTxxx2 399

Teldat bintec R3002 Specifications

General

Brand	Teldat
Model	bintec R3002
Category	Gateway
Language	English