Field Description
are initiated when the defined MIB variables assumes the as-
signed values.
• !" *3#: Operations configured and assigned in
Actions are initiated, when the defined interfaces take on a
specified status.
• !" (!!": The operations configured and as-
signed in Actions are triggered if the data traffic on the spe-
cified interfaces falls below or exceed the defined value.
• (#: the operations configured and assigned in Ac-
tions are triggered if the defined IP address is accessible or
not accessible.
• 2!" /!: Operations configured and as-
signed in Actions are initiated when the defined period of
validity is reached.
Monitored Variable
Only for Event Type %=5*'%
Select the MIB variable whose defined value is to be configured
as initiator. First, select the System in which the MIB variable is
saved, then the MIB Table and finally the MIB Variable itself.
Only the MIB tables and MIB variables present in the respective
area are displayed.
Compare Condition
Only for Event Type %=5*'%
Select whether the MIB variable (default value),
F3,, /##, ' F3, must have the value given in 2
) 6,3 or must lie within @ to initiate the operation.
Compare Value
Only for Event Type %=5*'%
Enter the value of the MIB variable.
Index Variables
Only for Event Type %=5*'%
Where required, select MIB variables to uniquely identify a spe-
cific data set in the MIB Table, e.g. 2!<. The unique
identification of a particular table entry is derived from the com-
bination of Index Variable (usually an index variable which is
flagged with *) and Index Value.
Use Index Variables to create more entries with Add.
Teldat GmbH
21 Local Services
bintec Rxxx2/RTxxx2 463
To Next Page
Loading...
Need help?
General
