4 Replacement Procedures 4.1 General
Removing the Battery Pack
Remove the battery pack according to the following procedures and Figure 4-1.
CAUTION: When handling the battery packs, use care not to short circuit the
terminals. Do not drop, hit, twist, or bend the battery packs. Do not scratch or break up
their casing.
1. Turn the computer upside down so that the back is facing you.
2. Slide out the battery lock.
3. Slide the battery release latch and remove the battery pack from the computer.
1
2
battery lock
battery latch
battery pack
Figure 4-1 Removing the battery pack
NOTE: Dispose of the used battery packs as required by local ordinances or
regulations.
4-8 Qosmio F40/F45 Maintenance Manual
To Next Page
Loading...
Need help?
General