4.22 FELICA card, Bluetooth Card and LED Board 4 Replacement Procedures
Installing the FELICA card(For JAPAN Model Only), Bluetooth card and LED Board
Install the touch pad and button board according to the following procedures and Figure 4-38.
1. Connect the FELICA card flat cable to FELICA card and Bluetooth card cable to
Bluetooth card.
2. Seat the FELICA card, Bluetooth card and FELICA card bracket in the correct
position and secure it with the four M2x3 black flat head screws.
3. Connect the LED board flat cable to CN6003 on the LED board.
4. Seat the LED board in the correct position and secure it with the tow M2x3 black flat
head screws.
Qosmio F40/F45 Maintenance Manual 4-69
To Next Page
Loading...
Need help?
General