4 Replacement Procedures 4.8 Robson Card
4.8 Robson Card
Removing the Robson Card
Remove the Robson card according to the following procedures and Figure 4-17.
CAUTION: Do not touch the connectors on the Robson card and in the computer with
your bare hands. Robson cards can fail if they are contaminated with sweat, natural
oils, etc. from your hands.
1. Remove the two M2x4 white bind screws securing the Robson card.
2. Pull the wireless Robson card up and out at an angle.
M2x4 white bin screw
Robson card
Figure 4-17 Removing the Robson card
4-36 Qosmio F40/F45 Maintenance Manual
To Next Page
Loading...
Need help?
General