4.26 RJ11 Cable, TV Antenna Connector and B-CAS Card Slot 4 Replacement Procedures
4.26 RJ11 cable, TV Antenna Connector and B-CAS card Slot
Removing the RJ11 cable, TV Antenna Connector and B-CAS card Slot
Remove the RJ11 cable, TV Antenna Connector and B-CAS card Slot according to the
following procedures and Figure 4-42.
1. Remove the RJ11 cable.
2. Remove one M2.5x4 white flat head screw securing the TV antenna connector.
3. Remove the TV antenna connector.
4. Remove four M2x3 black flat head screws securing the B-CAS card slot.
5. Remove the B-CAS card slot.
B CAS card slot-
TV antenna connector
RJ11 cable
M2x3 black flat head screw
M2x4 white flat
head screw
Figure 4-42 Removing the RJ11 cable, TV Antenna Connector and B-
CAS card Slot
Qosmio F40/F45 Maintenance Manual 4-75
To Next Page
Loading...
Need help?
General