Technical Section
Test - View Inputs
Enter the View Inputs item to view all inputs with real-time updates.
Figure 17. View Inputs screen in Diagnostics menu
The Model RPC30 controller will display “Unconfigured” for any inputs that have not been
configured. Go to the Configure menu to configure these inputs appropriately.
Use the Flow Control or Temp Control items to manipulate control outputs and view how
measurements respond.
Test - View Outputs
Enter the View Outputs item to view all output signals with real-time updates.
Figure 18. View Outputs screen in Diagnostics menu
Use the Flow Control or Temp Control items to manipulate control outputs and view how
measurements respond.
If the controller passes each of the tests, the mechanical piece parts are all functioning correctly.
Test – Touch Cal
If the touch screen does not properly register the position of touches, enter the Touch Cal item to
recalibrate the touch screen. When recalibrating the touch screen, the PresSura controller will
prompt the user to touch the screen in the top left and bottom right corner.
Use a stylus or similar instrument for best calibration of the touch screen.
To Next Page
Loading...
Need help?
General
