TSI Instruments PRESSURA RPC30 User Manual

Technical Section
29
Rm1 Setpnts Menu
MENU ITEM
SOFTWARE
NAME
ITEM DESCRIPTION
ITEM RANGE
DEFAULT
VALUE
Room 1 Negative
Pressure Setpoint
Neg Setpnt
The Neg Setpnt item sets the negative pressure control
setpoint. The PresSura controller will maintain the room
under negative pressure when item is enabled.
This item is active when the TSI key switch is in negative
room pressure position or when NEGATIVE is selected in
Room Mode item. However, it is always accessible
through the menu system.
0 to
-0.19500 in. W.C.
(TSI SENSOR)
0 in W.C. to
-1.0 in W.C.
(PRESSURE
TRANSDUCER)
NOTE
Neg Setpoint
cannot be set less
negative than the
Neg Low Alm or
more negative than
the Neg Hi Alm
-0.02 in. W.C.
Room 1 Positive
Pressure Setpoint
Pos Setpnt
The Pos Setpnt item sets the positive pressure control
setpoint. The PresSura controller will maintain the room
under positive pressure when item is enabled.
This item is active when the TSI key switch is in positive
room pressure position or when POSITIVE is selected in
Room Mode item. However, it is always accessible
through the menu system.
0 to
+0.19500 in. W.C.
(TSI SENSOR)
0 in W.C. to
+1.0 in W.C.
(PRESSURE
TRANSDUCER)
NOTE
Pos Setpoint
cannot be set less
positive than the
Pos Low Alm or
more positive than
the Pos Hi Alm
+0.02 in. W.C.

TSI Instruments PRESSURA RPC30 Specifications

General

Brand	TSI Instruments
Model	PRESSURA RPC30
Category	Controller
Language	English