1
How to Use This Manual
The Operation and Service Manual describes how to operate, configure, calibrate, maintain and
troubleshoot the Model RPC30 Room Pressure Controller. The manual is divided into two parts.
Part one describes the unit and how to interface with the device. This section should be read by
users, facilities staff, and anyone who requires a basic understanding of how the device operates.
Part two describes the technical aspects of the product which include operation, configuration,
calibration, maintenance and troubleshooting. Part two should be read by personnel programming
or maintaining the unit.
TSI recommends thoroughly reading this
manual before changing any software items.
NOTE: This operation and service manual assumes that the controller has been properly
installed. Refer to the Installation Instructions if there is any question as to whether the
controller has been installed properly.
Safety Information
This section gives instructions to promote safe and proper handling of Model RPC30 Room
Pressure Controller.
There are no user-serviceable parts inside the instrument. Opening the instrument case will void
the warranty. Refer all service of the unit to a qualified technician.
Description of Caution Symbol
Caution indicates:
Equipment may be damaged if procedures are not followed.
Improper settings may result in loss of containment.
Important information about unit operation.
Access Code / Passcode
Model RPC30 Room Pressure Controllers have access codes to limit unauthorized access to the
room mode or complete menu system. The access codes can be turned on or off through the
Passcode menu item. When the units ship from TSI, they are configured with the access code off.
Refer to Appendix D, Passcode, for instructions on entering the access code.
To Next Page
Loading...
Need help?
General
