Unify OpenScape CP400 User Manual

106 Phoning on several lines (multi-line)
Accepting calls for the manager in the
secretarial office
For calls for the manager, the phone rings in the secretarial office.
^ Lift the handset.
or
É Press the key and use speakerphone mode.
Accepting calls for the manager during a call
You are conducting a call.
A call is coming in for the manager.
[ Ask your call partner to wait.
Press the programmed “Übernahme” function key.
Ending a call - back to the first call:
Confirm.
Continue the call with the first call partner.
Transferring a call to the manager
Requirement: You have accepted a call for the manager in the secretarial of-
fice.
Press the “Manager” DDS key. You are connected with the manager.
With announcement
[ Announce call partner.
\ Replace the handset.
Without announcement
\ Immediately replace the handset.
Übernahme
£
Beenden und zurück? l
Manager
_

Unify OpenScape CP400 Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Display diagonal	3.7 \
Backlight display	Yes
Display resolution	240 x 120 pixels
Volume control	Buttons
Number of programmable keys	16
Caller ID	-
Lines quantity	- lines
Phonebook capacity	1000 entries
Security algorithms	128-bit AES, 256-bit AES, HTTPS
Networking standards	IEEE 802.3az
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	IP v4/v6 (SIP) IPv4 (HFA), DHCP,
Number of handles included	- pc(s)
Operating system installed	Linux
Ringer type	MP3
Voice codecs	G.711, G.722, G.729, G.729A, G.729B
Safety	CISPR22 Class B, CISPR 24 EN55032 Class B, EN55024 FCC Part 15 (CFR 47) Class B
Certification	CE NRTL FCC Part 68 (CFR 47) / CS-03 Part V
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	5 - 70 °C
Headset connectivity	DHSG/EHS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	165 mm
Width	283 mm
Height	143 mm
Weight	1200 g