128 Other settings and functions
Press the Function key to which the door has been assigned. The door opens.
In case there is a problem with the communication with the door, you will see a
pop-up message on your device screen.
Receiving a call from the door phone
Prerequisite: Door opener has been configured by your administrator.
If the service engineer has set up a door phone and your administrator has
configured it, you can speak to the visitors and activate the door opener from
your CP400 phone.
When someone rings the door bell, you will receive an incoming call from the
door.
Speak with a visitor over the door terminal
Prerequisite: Phone is called from the door phone.
^ Lift the handset. You are connected to the entrance telephone immediately
or
: Press key
You can now talk with your visitors.
Rejecting a call from the door phone
Í Confirm with the softkey. The call is rejected.
Opening the door after answering a door phone call
Prerequisite: Door opener has been configured by your administrator. A call
from the door phone has been answered.
When you answer the call from the door phone, you see the following screen on
your CP400 screen. You can talk to your visitor.
Press with the softkey to open the door.
Door Opener 1
_
Door Opener 1
3333
Incoming call
To Next Page
Loading...
Need help?
General
Weight and Dimensions
