Unify OpenScape CP400 User Manual

66 Setting up the phone
OpenScape UC
The OpenScape UC can be configured in the Configuration menu. Open the
OpenScape UC Settings and insert the required login information.
The OpenScape Desk Phone CP400 will login using the given user credentials.
If the data is incomplete (missing server address, username or password) the
phone will not try to login at all.
The OpenScape UC can be also configured in WBM  page 152.
ñ
If you experience any difficulties with the OpenScape UC Configuration,
please contact your administrator.
OpenScape UC
Configuration:
Microsoft® Exchange
492225569800@system
********
OpenScape UC
https://10.22.11.185:8443Server
Benutzername
Passwort

Unify OpenScape CP400 Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Display diagonal	3.7 \
Backlight display	Yes
Display resolution	240 x 120 pixels
Volume control	Buttons
Number of programmable keys	16
Caller ID	-
Lines quantity	- lines
Phonebook capacity	1000 entries
Security algorithms	128-bit AES, 256-bit AES, HTTPS
Networking standards	IEEE 802.3az
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	IP v4/v6 (SIP) IPv4 (HFA), DHCP,
Number of handles included	- pc(s)
Operating system installed	Linux
Ringer type	MP3
Voice codecs	G.711, G.722, G.729, G.729A, G.729B
Safety	CISPR22 Class B, CISPR 24 EN55032 Class B, EN55024 FCC Part 15 (CFR 47) Class B
Certification	CE NRTL FCC Part 68 (CFR 47) / CS-03 Part V
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	5 - 70 °C
Headset connectivity	DHSG/EHS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	165 mm
Width	283 mm
Height	143 mm
Weight	1200 g