80 Making calls
Forwarding calls
You can program several types of call forwarding on your line.
Use call forwarding
You can immediately forward internal and/or external calls to your lines to diffe-
rent internal or external telephones (destinations) (external destinations are also
possible if the system is configured accordingly).
Setting up call forwarding via the call forwarding menu
\ Open the Forwarding menu.
Confirm.
or
Confirm.
or
Confirm.
or
Variable Umleitung EIN All calls are forwarded to the stored phone
number, and the call number is deleted
when the call is disconnected.
Feste Umleitung EIN All calls are forwarded, the stored phone
number is not deleted when the call is dis-
connected.
Uml. für intern EIN Only internal calls are forwarded.
Uml. für extern EIN Only external calls are forwarded.
Umleitung besetzt EIN If your connection is busy, all calls are for-
warded.
Umleitung nach Zeit EIN If you do not pick up a call, all calls will be
forwarded after a certain amount of time.
Uml. besetzt/n. Zeit EIN If your connection is busy, or you do not pick
up a call, all calls will be forwarded following
a certain period.
If call forwarding is activated, a special dial tone sounds when the handset
is lifted.
If DTMF dial-in (ask relevant Administrator) is active, you can also divert
calls there. Destinations: Fax = 870, Direct inward dialing = 871, Fax-Di-
rect inward dialing = 872.
If you are the end caller of a forwarded call, you can see the call number
or the name of the forwarding party in the Notification area of the display
(1st. line) and the those of the caller below it.
In the menu, you immediately have an overview of call forwarding current-
ly set-up. This menu is also available via the user settings.
Variable: All calls
No destination set
¦
_
Variable: External
calls
No destination set
¦
_
Variable: Internal calls
No destination
set
¦
_
To Next Page
Loading...
Need help?
General
Weight and Dimensions
