Unify OpenScape CP400 User Manual

Other settings and functions 123
Save destination for fax /PC/busy stations- call
forwarding activated
@ Open menu  page 22.
Confirm.
Select and confirm.
j Enter the code for the desired call forwarding type. Codes are assigned by the
responsible administrator. In the table, you can enter the key figures that are va-
lid for you:
j Enter phone number of other connection.
Confirm.
j Enter PIN
Confirm.
j Enter the destination phone number.
Confirm.
Call forwarding is active.
Destinations? l
Forward phone number.:? f
„Forwarding for Fax“:
„Forwarding for PC“:
„Forwarding for Busy“:
Complete? l
Complete? l
Save? l

Unify OpenScape CP400 Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Display diagonal	3.7 \
Backlight display	Yes
Display resolution	240 x 120 pixels
Volume control	Buttons
Number of programmable keys	16
Caller ID	-
Lines quantity	- lines
Phonebook capacity	1000 entries
Security algorithms	128-bit AES, 256-bit AES, HTTPS
Networking standards	IEEE 802.3az
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	IP v4/v6 (SIP) IPv4 (HFA), DHCP,
Number of handles included	- pc(s)
Operating system installed	Linux
Ringer type	MP3
Voice codecs	G.711, G.722, G.729, G.729A, G.729B
Safety	CISPR22 Class B, CISPR 24 EN55032 Class B, EN55024 FCC Part 15 (CFR 47) Class B
Certification	CE NRTL FCC Part 68 (CFR 47) / CS-03 Part V
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	5 - 70 °C
Headset connectivity	DHSG/EHS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	165 mm
Width	283 mm
Height	143 mm
Weight	1200 g