Other settings and functions 121
Announcement (Broadcast) to all members of a
management group
With this function, you can send an announcement to all members (10 to 40) of
a management group at the same time.
Z After you have set the group call, you will receive a confirmation tone when you
can start the announcement.
^ Lift the handset.
or
: Press the key and use speakerphone mode.
j System code for “Speaker call-1-way bcst“ (ask relevant administrator if neces-
sary)
or
Press programmed “Speaker call-1-way bcst“ key.
j Enter the internal phone number of a group member.
Z The loudspeakers of all group telephones are automatically switched on and you
receive a confirmation tone. You can begin the announcement.
\ Hang up the handset to end the announcement.
^ Once a group member lifts the handset, they are then connected to you and the
announcement is cancelled.
: When a group member presses the loudspeaker key
or
the concerned line key of the announcement, he will then be separated from the
announcement. If the last remaining member of the group presses the loudspe-
aker or line key, the announcement is ended.
Speaker call-1-way bcst
_
DSS
_
To Next Page
Loading...
Need help?
General
Weight and Dimensions
