Unify OpenScape CP400 User Manual

Operating your OpenScape Desk Phone CP400 47
Telephony settings
If the administrator has configured this, you can access and adjust basic telephone settings wi-
thout being asked to use the password.
Use the @ key to open the main menu and then switch to the settings.
Navigate to “Telephony settings”
The menu consists of the following items:
You can edit basic audio and display settings.
Conversations
forwarding on
Service/Settings
CFNR on
Service menu
Telephony settings
Einstellungen
User settings
Audio
Display
Telephony settings
Telephony settings

Unify OpenScape CP400 Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Display diagonal	3.7 \
Backlight display	Yes
Display resolution	240 x 120 pixels
Volume control	Buttons
Number of programmable keys	16
Caller ID	-
Lines quantity	- lines
Phonebook capacity	1000 entries
Security algorithms	128-bit AES, 256-bit AES, HTTPS
Networking standards	IEEE 802.3az
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	IP v4/v6 (SIP) IPv4 (HFA), DHCP,
Number of handles included	- pc(s)
Operating system installed	Linux
Ringer type	MP3
Voice codecs	G.711, G.722, G.729, G.729A, G.729B
Safety	CISPR22 Class B, CISPR 24 EN55032 Class B, EN55024 FCC Part 15 (CFR 47) Class B
Certification	CE NRTL FCC Part 68 (CFR 47) / CS-03 Part V
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	5 - 70 °C
Headset connectivity	DHSG/EHS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	165 mm
Width	283 mm
Height	143 mm
Weight	1200 g