118 Other settings and functions
System-wide voice calling
You can initiate a speaker call with any internal participant whose phone has a
hands-free function or a loudspeaker.
Speaker call to a variable destination
A target subscriber is contacted via their internal phone number.
^ Lift the handset.
or
: Press the key and use speakerphone mode.
j System code for “Speaker call-one-way“ (ask relevant administrator if neces-
sary)
or
Press programmed “Speaker call“ key.
j Enter internal phone number of subscriber.
A connection to the target’s loudspeaker is established immediately, if
• not busy,
• the handset isn’t lifted,
• and the speaker call protect isn’t activated.
Z The caller receives a confirmation tone when the connection is established and
they can talk.
^ The receiver can establish the connection by picking up the handset.
: When the receiver the loudspeaker key
or
presses the line key (if set-up), the connection is cancelled.
Speaker call
_
Line 1
_
The amount of possible speaker calls corresponds to the number of pos-
sible normal connections.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
