70 Programming function keys
Setting up selected dialing keys
You can assign phone numbers to selected dialing keys on 2 levels. To assign
the 2nd level a “shift key” must be selected.
You first assign a function key with the "selected dialing" function. In an additio-
nal step you determine the phone number.
If necessary, switch to the second level
Hold down the Function keys of the phone or of the OpenScape Key Module 400
that is to have a function assigned to it, until the Key Programming Menu is dis-
played.
Confirm.
Confirm
j Enter the phone number and confirm.
Save the setting with the softkey. The key is programmed.
Setting up dialing keys with contact data from an
existing local conversation
You can assign phone numbers to selected dialling keys, forwarding keys and
deflect keys using the contact data from an existing local conversation. It is also
possible to copy the contact name and use it as a key label, but only with selec-
ted dialling keys.
In the Favorites menu,hold down the Function key to which a function is to be
assigned until the programming menu is displayed. Then select Edit selected
dialing.
Level shift
_
_
Edit direct destination selec- -
_
Number
-
_
Q
_
Key programming
Assign telephony function
Assign local feature
Edit selected dialing
To Next Page
Loading...
Need help?
General
Weight and Dimensions
