Unify OpenScape CP400 User Manual

Private / Security 135
Speaker call protect on/off
You can prevent yourself from being contacted directly. Any attempt to talk to
you directly via the loudspeaker will then result in a normal call.
@ Open menu  page 22.
Select and confirm.
Select and confirm. The display shows whether the speaker call protect is swit-
ched on or off.
Confirm.
or
confirm.
Caller ID suppression
The display suppression applies only to a subsequent call and is not stored du-
ring the redial  page 99 selection.
@ Open menu  page 22.
Select and confirm.
Confirm. The dial tone is audible.
j Enter phone number of subscriber. If the subscriber accepts the call, your num-
ber is not displayed.
User password
Your User password protects your user settings. You can also use the User
password to fully lock your phone page 138.
The administrator may have configured the following settings:
• The password is deactivated: You do not have the option to configure user set-
tings. The message "Password is disabled" is displayed.
• The password is temporarily locked: You do not have the option to configure
user settings at this time. The message "Password is suspended" is displayed.
• After initially logging on to a user area, you may have to replace the default
password with a new password.
• A password can have a predefined period of validity: You will have to create a
new password when the period ends. The message "Change password (x
days remaining)" will alert you to this at the appropriate time. The message
"Password has expired" appears when the validity period has expired. Confirm
"Change password" and change the password as described in this section.
• If you repeatedly enter the wrong password (2 to 5 times), additional attempts
are blocked. You can make another attempt after a predefined time.
• It is possible that you will not be able to re-use a previously used password for
a period of time, which means you have to create another "new password".
• Your administrator can tell you about the rules for which and how many cha-
racters can or must be used in the password.
Switch? f
Speaker call protect? f
Turn on? l
Turn off? l
More features? f
Display suppress. on? l

Unify OpenScape CP400 Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Display diagonal	3.7 \
Backlight display	Yes
Display resolution	240 x 120 pixels
Volume control	Buttons
Number of programmable keys	16
Caller ID	-
Lines quantity	- lines
Phonebook capacity	1000 entries
Security algorithms	128-bit AES, 256-bit AES, HTTPS
Networking standards	IEEE 802.3az
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	IP v4/v6 (SIP) IPv4 (HFA), DHCP,
Number of handles included	- pc(s)
Operating system installed	Linux
Ringer type	MP3
Voice codecs	G.711, G.722, G.729, G.729A, G.729B
Safety	CISPR22 Class B, CISPR 24 EN55032 Class B, EN55024 FCC Part 15 (CFR 47) Class B
Certification	CE NRTL FCC Part 68 (CFR 47) / CS-03 Part V
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	5 - 70 °C
Headset connectivity	DHSG/EHS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	165 mm
Width	283 mm
Height	143 mm
Weight	1200 g