Unify OpenScape CP400 User Manual

Making calls 79
Using speed dial
Speed dial numbers can also contain command or access code sequences and
may be linked with other speed dial numbers  page 64.
Dialing with central speed dial numbers
Requirement: You know the speed dial number  page 64.
@ Open menu  page 22.
Select and confirm.
j Enter speed dial number.
The connection is immediately established.
Dialing with individual speed dial numbers
Requirement: You have set up individual speed dial numbers  page 65.
@ Open menu page 22.
Select and confirm.
0... 9 Press the required speed dial key.
The connection is immediately established.
This function must be set up by your responsible administrator.
Kurzwahl anwenden? f
Kurzwahl anwenden?

Unify OpenScape CP400 Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Display diagonal	3.7 \
Backlight display	Yes
Display resolution	240 x 120 pixels
Volume control	Buttons
Number of programmable keys	16
Caller ID	-
Lines quantity	- lines
Phonebook capacity	1000 entries
Security algorithms	128-bit AES, 256-bit AES, HTTPS
Networking standards	IEEE 802.3az
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	IP v4/v6 (SIP) IPv4 (HFA), DHCP,
Number of handles included	- pc(s)
Operating system installed	Linux
Ringer type	MP3
Voice codecs	G.711, G.722, G.729, G.729A, G.729B
Safety	CISPR22 Class B, CISPR 24 EN55032 Class B, EN55024 FCC Part 15 (CFR 47) Class B
Certification	CE NRTL FCC Part 68 (CFR 47) / CS-03 Part V
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	5 - 70 °C
Headset connectivity	DHSG/EHS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	165 mm
Width	283 mm
Height	143 mm
Weight	1200 g