Unify OpenScape IP 35G SIP User Manual

Privacy/security 137
Deactivating the user password
You can deactivate the phone’s password prompt if a password has already
been configured.
Settings Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
j Enter the current password (at least six characters, text entry, see  Page 18)
and confirm your entry.
Select and confirm the option shown.
j Enter six zeros ("000000") to deactivate the password. Confirm entry (at least 6
characters, (text entry, see
 Page 18).
Select and confirm the option shown.
j Enter six zeros ("000000") to deactivate the password (for text input, see
 Page 18) and confirm.
Select and confirm the option shown.
The deactivation of the password prompt does not affect the WBM
interface
 Page 198 or CTI applications that use a password prompt.
As long as the user password is deactivated, you do not have access to
user settings via the WBM interface.
If you deactivate the user password, you are not able to lock the phone
 Page 138 and the user menu is not password-protected.
Settings
User
Security?
Change user password l
Current password l
New user password f
Confirm new user password f
Save & Exit l

Unify OpenScape IP 35G SIP Specifications

General

Brand	Unify
Model	OpenScape IP 35G SIP
Category	IP Phone
Language	English