146 OpenScape Voice functions
Making anonymous calls
Your administrator decides whether or not your caller ID (name and phone num-
ber) is displayed on a called party’s station. Anonymous calling is when your
data is not transmitted. The settings configured can be deactivated, however, for
specific calls.
Deactivating
If your administrator permanently activated anonymous calling for your phone,
you can deactivate this setting as follows:
^ Lift the handset.
j Enter the code (see the table of codes ïƒ Page 163) to transmit the caller infor-
mation.
Z You hear a confirmation tone or an announcement.
Activating
If your administrator activated caller ID transmission for your phone, you can de-
activate this setting as follows:
^ Lift the handset.
j Enter the code (see the table of codes ïƒ Page 163) to suppress the caller ID.
Z Wait until you hear the confirmation tone or an announcement.
Caller ID transfer is suppressed. "Private/Anonymous" appears on the called
party’s display instead of the caller ID.
• If your caller ID is transmitted: your caller ID is displayed.
• If your caller ID is suppressed: "unknown" is displayed.
To Next Page
Loading...
Need help?
General