Unify OpenScape IP 35G SIP User Manual

168 Individual phone configuration
Date and time
This function allows you to select one of three different display modes for the
date and manually set the time if necessary.
z
You can also configure these settings via the WBM interface  Page 198.
Setting the time
Settings Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown. The time set is displayed.
j Enter and confirm the time.
Select and confirm the option shown.
Setting the date
Settings Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown. The date set is displayed.
j Enter and confirm the date.
Select and confirm the option shown.
Setting daylight saving time
Prerequisite: Auto DST is deactivated  Page 170.
z
You can also configure this setting via the WBM interface  Page 198.
Settings
User
Date and time?
Time = 14:44 f
Save & Exit l
Settings
User
Date and time?
Date = 20.02.2007 f
Save & Exit l

Unify OpenScape IP 35G SIP Specifications

General

Brand	Unify
Model	OpenScape IP 35G SIP
Category	IP Phone
Language	English