Unify OpenScape IP 35G SIP User Manual

198 Web interface (WBM interface)
Web interface (WBM interface)
General
You can configure a number of settings for your phone via the web interface. Communication is
via a secure HTTPS connection. Access to the web interface must be activated by administrator.
Calling up the WBM interface
To call up the interface, open a Web browser and enter the following:
https://[IP address of the phone]
[IP address of the phone] is the IP address of your phone.
or
https://[Name of the phone]
[Name of the phone] which was assigned by administrator.
Administrator Pages
This area allows settings for administering your phone and the network environment. Access to
the Administrator Pages is protected by the admin password. For more information, contact your
administrator.
For more information on the IP address, the web interface address, and how to connect the
telephone to the network, refer to the section entitled "Network information"
 Page 185.
You might receive a certificate notification from the browser. Follow the instructions to down-
load the certificate.
You will be prompted to configure a user password the first time you call up the web interface
 Page 135. You must log on with this password in future every time you want to open the
User Pages.

Unify OpenScape IP 35G SIP Specifications

General

Brand	Unify
Model	OpenScape IP 35G SIP
Category	IP Phone
Language	English