Basic functions 49
Confirm.
or Start conference
Select and confirm the option shown in the context menu for the call connection
when you intend to set up a conference with the new participant. You can also
use an already configured
Conference key in this instance.
j Enter and confirm the second party’s phone number.
Ending a consultation call
You end the consultation
Select and confirm the option shown.
The consultation call is disconnected. The call with the first party is resumed.
The second party hangs up
If the second call partner hangs up, you will be prompted to retrieve the first call
again if "Hold and hang-up" is disabled (
ïƒ Page 85). Otherwise, the first call will
remain on hold until you receive this prompt after a defined time interval.
Confirm the option shown. You are reconnected with the first party.
Ending the consultation with an active headset
Prerequisite: A key has been configured additionally by administrator with the
"Auto-Headset" function (AICS Zip tone) (
ïƒ Page 69).
S Press the "Auto-Headset" function key to activate automatic call answering. This
key and the headset key illuminate.
[ You are conducting a consultation call and the second party hangs up. You are
automatically reconnected with the waiting first party. The prompt "Retrieve held
call" does not appear.
If you want to use a call list or one of the phonebooks for the consultation
call, select Hold instead of Consult in the context menu and/or press the
Hold key and then open a required call list (
ïƒ Page 98) or one of the
phonebooks (ïƒ Page 108/ïƒ Page 111).
Alternatively you can open a call list or phonebook without using the Con-
sult or Hold functions – the active call is automatically placed on Hold.
If the call is kept on hold, you can retrieve the call via the context menu
before the set time expires.
To Next Page
Loading...
Need help?
General