Unify OpenScape IP 35G SIP User Manual

Call forwarding 63
Using call forwarding
The following functions are available for activating and deactivating call forward-
ing and configuring it in accordance with your requirements:
• ”Activating or deactivating immediate call forwarding”  Page 63
• ”Saving destination phone numbers for call forwarding”
 Page 64
• ”Preconfiguring or changing destination phone numbers”
 Page 65
• ”Copying and pasting destination phone numbers”
 Page 66
• ”Assigning a destination phone number to a call type”
 Page 67
• ”Activating/deactivating call forwarding”
 Page 67
Activating or deactivating immediate call forwarding
Prerequisite: Ideally you have configured the Forward key for "Variable call for-
warding" (see  Page 74). Otherwise you have to configure the settings for call
forwarding via the user menu ( Page 79). It is recommended to configure the
key so that you can use the following enhanced functions.
Forward Press the key shown.
Deactivating call forwarding
If call forwarding was activated for Unconditional, it is now automatically deac-
tivated.
or Activating forwarding to last destination
The pop-up menu opens. The message:
"Set forward on to" is displayed with the last forwarding destination used and
you are offered the following additional options:
• Accept
• Set a forwarding destination
• Edit call forwarding
• Cancel
Using last forwarding destination
Select and confirm within three seconds to reuse the last saved forwarding des-
tination for Unconditional. Call forwarding to this destination is immediately ac-
tivated for Any Call and the "Variable call forwarding" key illuminates.
If you do not confirm Accept immediately, call forwarding is activated automati-
cally after a short time.
or Activating with variable destination phone numbers
If you want to use a new forwarding destination:
Select and confirm within three seconds.
j Enter and confirm the new destination phone number.
or Confirm the last destination phone number saved (it will be displayed).
Call forwarding to the defined destination is immediately activated for Uncondi-
tional and Any Call and the "Variable call forwarding" key illuminates.
Accept? l
Set a forwarding destination f

Unify OpenScape IP 35G SIP Specifications

General

Brand	Unify
Model	OpenScape IP 35G SIP
Category	IP Phone
Language	English