Unify OpenScape IP 35G SIP User Manual

32 Basic functions
Answering a call
Your OpenScape Desk Phone IP 35G/35G Eco rings with the tone signal set
when an incoming call is received.
If transmitted, calling party information (name, phone number) appears on the
display.
Answering a call via the handset
The phone is ringing. The caller is displayed.
^ Lift the handset.
if nec. Vol.+ or Vol.- Set the call volume.
Answering a call via the loudspeaker
(speakerphone mode)
The phone is ringing. The caller is displayed.
The Speaker key flashes.
Confirm the option shown. The Speaker key lights up.
or
Speaker Press the key shown. The key lights up. The speakerphone function is activated.
if nec. Vol.+ or Vol.- Set the call volume.
If you have set a pattern melody  Page 174 on your phone, it is possible
that administrator has preset a different pattern melody or pattern se-
quence or deactivated the ringtone, depending on the call type (e.g. an ex-
ternal or internal call).
An incoming call will interrupt any ongoing telephone setting operations.
When the call ends, you can press the Settings key to return to the point
in the menu structure where you were interrupted.
If the phone number is stored in the local telephone, the associated name
is shown on the display (must be activated by administrator).
Accept? l

Unify OpenScape IP 35G SIP Specifications

General

Brand	Unify
Model	OpenScape IP 35G SIP
Category	IP Phone
Language	English