Unify OpenScape IP 35G SIP User Manual

62 Call forwarding
Call forwarding by call type
If use of system-assisted functions has been enabled by administrator and the
Ext/int Forwardingfunction activated, call forwarding by cal type functionality
will be available to you. Forwarding in this case is dependent on the forwarding
type and additionally on the call type. The menu layout therefore deviates from
that for standard forwarding
 Page 56. You can also change, activate, and de-
activate call forwarding during a call.
Forwarding menu
The Forwarding menu is opened either using the configured "Variable call for-
warding" key (see  Page 74) or via the user menu ( Page 79) and contains
the three forwarding types:
• Unconditional
•Busy
• No reply
Because of its direct impact, "Unconditional" call forwarding has the highest
priority followed by "No reply" and "Busy".
If active, "Unconditional" call forwarding is indicated on the display when the
phone is idle. Forwarded calls are logged in a call list if allowed (see
 Page 24).
The three forwarding types are each assigned three call types in the Forward-
ing menu:
Unconditional
– Any Call
– External
– Internal
Busy
– Any Call
– External
– Internal
No reply
– Any Call
– External
– Internal

Unify OpenScape IP 35G SIP Specifications

General

Brand	Unify
Model	OpenScape IP 35G SIP
Category	IP Phone
Language	English