78 Enhanced phone functions
or Deflecting to a DSS number
A call can be deflected to a direct station selection (DSS) subscriber using the
DSS key, if the key is configured and the deflect function is activated by your ad
-
ministrator ïƒ Page 127.
Information only, as set by administrator: Yes or No.
Select and confirm the option shown.
Rejecting a call
You can reject an incoming call.
Prerequisite: An incoming call is displayed or signalled. "Reject" must be au-
thorised by administrator.
Select and confirm the option shown.
The caller hears a busy signal.
Entering a destination phone number is not mandatory when call deflec-
tion is active. If you want to deflect an incoming call, you are prompted to
enter a destination phone number if there is none stored.
If the rejected caller’s phone number is transmitted, it is saved in the call
list. You can then call this party back at a later time.
To Next Page
Loading...
Need help?
General