EasyManuals Logo
Home>Unify>IP Phone>OpenScape IP 35G SIP

Unify OpenScape IP 35G SIP User Manual

Unify OpenScape IP 35G SIP
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #189 background imageLoading...
Page #189 background image
Call recording 189
Enhanced functions:
1. A conference
1
can be set up or cleared down during recording.
2. A consultation can be performed during recording.
3. Call transfer is also available during recording.
4. A second call can be accepted during recording.
The following features are not supported:
1. Playing back recordings over the telephone.
2. Deleting recordings over the telephone.
3. Functions for editing recordings over the telephone.
Recording tips
You will receive the following advisories while a call is being recorded:
• The recording symbol | on the display (permanent)
• Beep (repeated at intervals for you and your call partner)
• Beep (single at the start of recording for you and your call partner)
The audible advisory can also be switched off. Please check with the relevant
administrator.
Multiline
There is no difference between multi-line calls and single-line calls when it
comes to recording calls. If recording has started, the call is recorded, otherwise
not. The recording status of a line continues as long as calls are connected to
this line.
For example, if line A is being recorded (manually triggered) and the caller
switches to line B or puts line A on manual hold and switches to line B, the re
-
cording is ended and a partial recording is saved.
If recording for the call on line B is disabled (operating mode = Manual or Au-
toStart) and the caller switches to line A, the recording for line A is not restarted.
The operating modes mentioned (All Calls, AutoStart or Manual) refer to the tele-
phone and are therefore the same for all lines
Recording calls
Automatic call recording
This is the simplest mode. If you have accepted a call or called a subscriber and
the subscriber answers, the call is recorded automatically. Refer to
 Page 188
to check which calls this can be.
As soon as the recording starts, you will see the recording symbol | and hear
a beep (see also
 Page 189).
You cannot pause the recording manually in this mode.
1. Server-based conference only

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Unify OpenScape IP 35G SIP and is the answer not in the manual?

Unify OpenScape IP 35G SIP Specifications

General IconGeneral
BrandUnify
ModelOpenScape IP 35G SIP
CategoryIP Phone
LanguageEnglish

Related product manuals